Steamer 625-502revA
Printed in USA 0910 © 20037
Steamer
625-A
4
Pour a solution of Delimer into the steam chamber.
Let solution soak for at least 15 minutes.
5
A. Clean stem injection ports with a paper clip or small wire.
B. Rinse with clean water.
C. Wash all external surfaces of the steamer with a solution of
detergent and water in a spray bottle.
Spray directly onto a clean sanitized towel and wipe
the unit clean.
D. Reassemble the unit.
2
A. Remove spatula.
B. Remove the top
plate by carefully
sliding it forward
and out of the unit.
C. Remove the
venturi plate.
Cleaning - Monthly PM Tasks
The following equipment is required:
• Detergent or Cleaning Solution
• Delimer/Lime Scale Remover
(as required)
• Sanitizer
• Clean sanitized towel
• Protective (insulated) gloves
Top Cover
Top Plate
Venturi Plate
Spatula
1
While wearing protective gloves, remove the top cover by
pulling up and off the unit.
3
A. Wash top cover, top plate, spatula, and venturi plate in a
solution of detergent and water.
B. Rinse with clean water, and then sanitize in a solution of
sanitizer.
C. Let air dry.
IMPORTANT. It is not recommended
to leave open container of delimer around
While wearing protective gloves:
CAUTION
Do not spray directly on the unit or use abrasive cleaners!
WARNING
Turn the unit off and unplug the power cord from the electrical recep-
tacle. Proceed with caution, unit is still hot!
CAUTION
This unit is not watertight. Do not clean with a water jet/jet spray. Do
not immerse the unit in water.
Do not use abrasive materials such as scrapers, steel wool, etc. to
clean the spatula or steam chamber.
Comments to this Manuals